Best Mulcher for Mini Excavators FEMAC T1 REV

When choosing a mulcher or flail mower attachment for your excavator, it’s easy to focus on cutting performance alone. In reality, with the FEMAC T1 REV range, the biggest factor isn’t what the mulcher can cut, it’s what excavator you’re running.

The FEMAC T1-60 and T1-80 hydraulic mulchers share the same core design, rotor system, and tooth options. The primary difference between the two models is cutting width and weight, making correct machine matching critical for performance and longevity.

One Mulcher Platform, Two Excavator Classes

Both the T1-60 and T1-80 are part of FEMAC’s compact T1 REV platform, designed for light excavators operating in tight or sensitive environments.

What stays the same across both models:

Identical mulcher design and construction
Same rotor and reversible (REV) operation (both sides of the mulcher are open)
Same tooth options (Y-teeth or hammer teeth)
Same mulching capability

What changes is how much machine is required to drive the attachment efficiently.

FEMAC T1-60: Optimised for 1-Tonne Excavators

FEMAC T1- 60 Flail Mower/ Mulcher

The T1-60 mulcher is designed for 1 Tonne class excavators, where hydraulic flow and machine stability are more limited.

With a 600 mm cutting width, it allows smaller machines to:

Work more safely on slopes and more comfortably in tight-access areas
Operate on jobs where weight is a critical factor
Work with lower running costs

For operators running compact minis, the T1-60 ensures consistent rotor speed and smooth mulching performance without compromising machine control. The lighter rotor will spin up faster and maneuver better thanks to a lighter operating weight.

Best suited to:

1.0 T excavators
Machines with 20L/min aux hydraulic flow or more
Precision work in confined spaces

FEMAC T1-80: Increased Coverage for 1.5-Tonne+ Machines

FEMAC T1-80 Mulcher

The T1-80 mulcher uses the same rotor design but expands the working width to 800 mm, requiring additional machine lifting capacity to perform at its best.

Paired with 1.5 – 2T excavators, the T1-80 delivers:

Greater coverage per pass
Higher job efficiency
Better use of available hydraulic flow

The wider cutting width improves productivity, not cutting capability, making it ideal for contractors who want to clear more ground without stepping up to a heavier mulcher or larger excavator class.

Best suited to:

1.5 – 2 T excavators
Operators prioritising output and efficiency
Larger or more open work areas

FEMAC T1-60 vs T1-80 Comparison

Femac T1-60 and T1-80 Comparison Chart

Mulching Performance Comes Down to Teeth Selection

While the T1-60 and T1-80 differ in size, vegetation type and cutting performance are driven by tooth selection, not the mulcher model itself.

Y-teeth and hammer teeth each serve different applications, and this is where operators can fine-tune their setup for grass, scrub, regrowth, or heavier material.

In general hammer teeth are the more versatile all-round tooth option, dealing with thicker material, while still cutting grass and thinner vegetation. Y-teeth are a great option for working with more fibrous plants, or dedicated grass cutting applications.

FEMAC Hydraulic Excavator Mulcher Attachment HF1 T1

HF1 Hammer Teeth

FEMAC Hydraulic Excavator Mulcher Attachment KF1 T1

KF1 ‘Y’ Teeth

See the FEMAC T1 Mulchers in Action

Talk to Delta Equipment About the Right Setup

Both the FEMAC T1-60 and T1-80 hydraulic mulchers are available through Delta Equipment, with expert advice to help match the right attachment, teeth, and excavator combination.

Made in Italy by FEMAC SRL